For more information on AutoZone, how they can help you care for your vehicle this season, and to find an AutoZone location near you, follow these links:

AutoZone Free

Vehicle Repair Guide

Brands

Locator

Accessories

FIELD & STREAM TIP //

Remove any dirt or mud that has built up around the brakes

BRAKE PADS & ROTORS //

Check the friction surface for uneven wear, grooves or small stress cracks caused by excess heat
Grooves in the friction surface are an indication of a damaged rotor or of debris lodged between the brake pad and rotor
Check to make sure that the rotor is within OE specifications – if not, resurface or replace
A rotor with heat stress cracks should be replaced

BRAKE HARDWARE //

Check for corroded, bent, worn out or broken springs, guide pins or clips
Damaged or worn out brake hardware can cause uneven wear on the new brake pads
To ensure the best results from your brake job, the brake hardware should be replaced with the new brake pads

TIRE CARE
Rotate your tires every 6,000 miles (or every other oil change). Make sure the tread is evenly worn as bald tread can make it hard for tires to grip the road and perform well.

WATER HAZARDS
Check depth before fording; water should be no deeper than bumper height. Drive slowly in water and cross streams at a 90-degree angle to minimize turbulence.

FLUSH COOLANT
Flush your cooling system every 24,000 miles. When refilling the system, use a mixture of antifreeze/coolant and water. Typically a 50/50 mix is recommended.